Release (17) - Fujitsu MAA3182SC Oem Manual

3.1.13 RELEASE (17)

Bit
Byte
0
1
2
3
4
5
This command releases the reserve state of an IDD in relation to the INIT that issued this
command.
When a reserve state in relation to the INIT that issues this command, or an IDD in the type of
reserve state which is the release object specified in the CDB of this command does not exist,
or even when the IDD is reserved by another SCSI device, this command is terminated
normally with a GOOD status, but it is no influence on the IDD's reserve state.
The INIT that issues this command must notify its own SCSI ID when the SELECTION phase
is executed. When the INIT's ID cannot be specified, this command is terminated with a
CHECK CONDITION status (ILLEGAL REQUEST [=5] / Initiator's SCSI ID not identified
[=90-00] without this command being executed. Also, the value specified in CDB byte 2 has
no meaning and is disregarded, but it is desirable for X '00' to be specified by the INIT in this
byte.
7 6 5
LUN 3rd Pty
× × ×
0 0 0
0 0 0
0 0 0
C141-E039-01EN
4 3 2
X'17'
3rd Pty Dev ID
× × ×
0 0 0
0 0 0
0 0 0
1 0
0
× ×
0 0
0 0
Flag Link
3 - 75