Network Configuration - Okina TVI-04 User Manual

3.5.3 Other alarm
Step1: enter into system configurationother alarm; refer to Fig 3-23:
Step2: select a hard disk in the pull down list box, when the disk capacity is lower than that value, there will
appear some text information on the lower right of the live image.
Step3: click "default" button to resort default setting; click "apply" button to save the setting; click "exit"
button to exit current interface.
3.5.4 Alarm out
Alarm out includes one sub menus: buzzer
① Buzzer
Step1: enter into system configurationbuzzer; (if here sets is off, all event without buzzer)
Step2: tick off Buzzer, set buzzer alarm hold time

3.6 Network configuration

Network configuration includes six submenus: Network, Sub Stream, Email, Server, NAT and Other
Settings. Network settings must be configured if DVR is used for monitoring over network.
3.6.1 Network
Step1: enter into system configurationnetwork configurationnetwork; refer to Fig 3-24:
Fig 3-23 other alarm
Fig 3-24 network configuration-network
24
TVD-04 / TVD-08 / TVD-16 / TVD-16-1U User's Manual