Okina TVI-04 User Manual page 27

TVD-04 / TVD-08 / TVD-16 / TVD-16-1U User's Manual
3.6.3 Email
Step1: enter into system configurationnetwork configurationemail; refer to Fig 3-26:
Fig 3-26 network configuration-email
SMTP Server/Port: the name and port number of SMTP server.
If your SMTP server supports the secure connection (SSL), like Gmail, please set the "Port" to 465 and
check "SSL Check"
Send address/password: sender's email address/password
Receive address: receiver's email address. Here user can add at least three mail addresses.
Click TEST button to test the valid of the mailbox.
Attaching image amount: user can attach at most three images at one time.
Snap Time Interval(s): User can select snap time interval.
"Strongly recommend to use Google mail (gmail)"
For Example:
SMTP Server: smtp.gmail.com
Port: 465
SSL Check: V
Send Address: alan@gmail.com
Receive Address1: test@yahoo.com
3.6.4 Server
This function is mainly used for connecting NVMS. The setting steps are as follows:
Step1: In the server interface, select "Enable" as shown in the Fig 3-27.
Step2: Check the IP address and port of the transfer media server in the NVMS. The default server port for
auto report is 2009
Fig 3-27 network configuration-Server
Step3: Enable the auto report in the NVMS when adding a new device. Then input the remaining information of
the device in the NVMS and self-define a device ID.
Step4: Input the above-mentioned server IP, server port and device ID in the server interface. Then click
"Apply" button to save the setting. Now, the CMS system will automatically connect this device.
27