Okina L08FF-04 Setup Manual

Eco h.264

Advertisement

Quick Links

L08FF-04
L08FF-08
ECO H.264 DVR
L08FF-16
Package Content
Inspect the packaging carton. Make sure the ECO H.264 DVR is properly delivered. Remove all
items from the box and make sure the box contains the following items.
ECO H.264 DVR
Front Panel
1
Channels
2
Power LED
3
Alarm LED
4
Network LED
5
Record LED
6
ENTER
7
ESC
8
Direction Keys
00P5L3080ZSEA4
SATA Cable
1. In Live and Playback modes, press any key to view the corresponding
video in full-screen.
2. In input interface, 1~10 can be used for direct input of numbers 0~9.
3. In Dome Camera Control mode, 1 is for entering the Set/ Go preset
menu; 2 is for hiding or displaying the hint screen; 11~16 is for quick
access of preset points 1~6.
It lights up when power source is connected.
It lights up when an alarm is triggered.
It lights up when network is connected. In addition, it blinks when data is
being transmitted via the network.
It blinks when videos are being recorded.
1. In OSD menu or selection interface, press these key to make the
selection or save settings.
2. In live full-screen viewing mode, press this key to view a 2× zoom
image; press it again to return.
Press this key to cancel or exit from certain control mode.
1. In Zoom mode, these keys function as normal direction keys.
2. In the OSD setup menu, the direction keys are used to move the
cursor to previous or next fields. To change the value in the selected
field, press UP / DOWN keys.
Setup Guide
Power
Power Cord
Adaptor
User's
Manual
1

Advertisement

Table of Contents
loading

Summary of Contents for Okina L08FF-04

  • Page 1 L08FF-04 L08FF-08 ECO H.264 DVR Setup Guide L08FF-16 Package Content Inspect the packaging carton. Make sure the ECO H.264 DVR is properly delivered. Remove all items from the box and make sure the box contains the following items. Power User’s ECO H.264 DVR...
  • Page 2: Rear Panel

    The USB 2.0 port allows users to connect an external USB device to the USB 2.0 Port unit, such as a USB ThumbDrive or a USB mouse. Press this key to enter Call Monitor Control mode. (8CH & 16CH models CALL only) COPY...
  • Page 3: Pin Definition Of Alarm I/O & Rs-485, And Audio In

    Pin Definition of Alarm I/O & RS-485, and Audio In Alarm I/O & RS-485: 4CH models: Pin Definition Pin Definition Pin Definition Pin Definition Alarm Out Open Alarm In 1 Alarm Out Close Alarm Out COM Alarm In 2 RS485 D+ Alarm In 3 RS485 D−...
  • Page 4: Basic Setup

    Basic Setup Enter the OSD main menu and setup some basic configuration of the DVR. The basic configuration can be set via either the DVR or DVRRemote, the remote software. Enter OSD Main Menu: • Press MENU to enter the OSD main menu. •...
  • Page 5: Dome Camera Control

    Dome Camera Control Dome Camera Connection & Settings: • See section Pin Definition of Alarm I/O & RS-485, and Audio In for RS-485 port pin definition. • Refer to the following figure. Connect the R+, R- terminals on the dome camera to the D+, D- terminals on the RS-485 port by RS-485 cable respectively.
  • Page 6: Basic Playback Operation

    Basic Playback Operation Search By Time: • Press SEARCH to enter the Search menu. • Move the cursor to “From” and press ENTER will start playing recorded video from the specified “From” time. • Move the cursor to “End” and press ENTER will start playing recorded video from the specified “End”...
  • Page 7 Playback Controls: Button Description The button is for rewinding the recorded video while playing back. Press the button LEFT repeatedly to increase the speed of reverse playback by 1×, 2×, 4×, 8×, 16×, or 32×. The button is used to play the recorded video fast forward. Press the button RIGHT repeatedly to increase the speed of forward playback by 1×, 2×, 4×, 8×, 16×, or 32×.
  • Page 8 • Version verification starts automatically to verify whether DVRRemote was installed. This process may take up to 30 seconds. • When the software is completely downloaded and installed, the Login Screen is displayed. • Enter the username and password. The default usernames and passwords are admin / 1234 and user / 4321.
  • Page 9 DVRRemote Playback Playback Remote Video: • Click <Play> on the main window toolbar, and then <Remote Playback> tab. • The <From> and <To> on top of the screen display the date and time from which recorded video is available for playback. •...
  • Page 10 Mobile View Software Mobile View software allows users to timely monitor via a mobile device with internet connection. Refer to below for brief introductions of installation (JAVA mobile devices) and basic operations. Download and Installation: • Access the java installation menu on a JAVA mobile device and connect the website that provides Mobile View software to directly download the software to the mobile device.

This manual is also suitable for:

L08ff-08L08ff-16

Table of Contents