Table of Contents
Advertisement
3.5.1
Schedule Setup
The Schedule Setup is used to set the day and night time, or weekend
recording schedule. Select <Schedule Setup> from the Record Setup menu
and press ENTER; the following menu is displayed.
• Make appropriate changes of the start time of Day and Night Time using
Direction keys.
• Press ENTER to confirm the settings or ESC to cancel.
• If a weekend record is required, select <ON> to enable the Weekend
Schedule in advance and then set the Weekend Start/End time.
• Press ESC to return to previous page.
3.5.2
Preset Record Configuration
The <Preset Config> is used to select the preset recording quality and frame
rate. In normal circumstances, it is strongly recommended to set the preset
configuration as <Best Quality>. Below table shows the PPS and picture size
under <Best Quality> in Half-D1 mode for 16CH models. Please refer to OSD
Setup Manual, Section Preset Record Configuration for more detailed
information.
Halfl-D1 mode (NTSC: 720x240@120PPS; PAL: 720x288@100PPS)
Normal PPS
7.5 NTSC
(6.25 PAL)
Schedule Setup
1. Day Time Start
2. Day Time End
3. Night Time Start
4. Night Time End
5. Weekend Schedule
6. Weekend Start
7. Weekend End
Normal Size
10 KB / PIC
DVR User's Manual
AM 06:00
PM 06:00
PM 06:00
AM 06:00
ON
Fri 18:00
Mon 06:00
Event PPS
Event Size
30 NTSC
10 KB / PIC
(25 PAL)
17
Advertisement
Table of Contents
