3.3 Record configuration
Record configuration includes five sub menus: enable, record bit rate, time, recycle record and stamp.
3.3.1 Enable
Step1: enter into system configurationrecord configurationenable; refer to Fig 3-10:
Step2: tick off record, audio and record time
Step3: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button
to exit current interface.
Definitions and descriptions of Record:
Parameter
Record
Audio
Live image mask area
Fig. 3-10 record configuration-enable
Record switch of every channels
Enable live record audio
17
TVD-04 / TVD-08 / TVD-16 / TVD-16-1U User's Manual
Meaning