User Management Configuration - Okina TVI-04 User Manual

3.6.6 Other settings
Step1: Enable DDNS server: user needs to input user name， password and host domain name of the
registered website, click TEST to test the effectively of relevant information.
STEP2: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button
to exit current interface.
Note: The domain name server that selected by user is a banding domain name of DVR. User should
logon the website which provided by the server supplier to register a user name and password firstly,
and then apply a domain name on line for the server. After the successful apply, user can access the
server from the IE client by inputting that domain name.
*Please reference Appendix to setup DDNS function.

3.7 User management configuration

Step1: enter into system configurationuser management configuration; refer to Fig 3-30:
Step2: click Add button, a dialog box will pop-up as Fig 3-31:
① General: Input user name, password; select user type: normal and advance, input the MAC address of
the PC; click OK button, this user will be added into the user list box; click Exit button to exit the current
interface.
Note: when the default value of binding PC MAC address is 0, the user is not bind with the specify
computer; the, the user can log in DVR on the binding computer after set the specific binding MAC
address.
Fig 3-29 network configuration-other settings
Fig 3-30 user management configuration
Fig 3-31 add-general
29
TVD-04 / TVD-08 / TVD-16 / TVD-16-1U User's Manual