Table of Contents
Advertisement
DVR User's Manual
3.4.3
Network Time Protocol Setup
Time Zone
Select <Time Zone> to enter the time zone. To find out the correct local time
zone, please visit
figure.
NOTE: The <Time Zone> must be set to the correct local time zone or
the <Network Time Protocol Setup> will not be accessible.
Network Time Protocol Setup
After entering the time zone, the <Network Time Protocol Setup> option will
appear. Select the <Network Time Protocol Setup> to set the time server.
The default time server is time.nist.gov, but the user can change it to other
time servers when desired. A list of IP addresses of the time servers is listed
below.
132.163.4.102
192.43.244.18
206.246.118.250
207.200.81.113
After the time server is set, select <Manually Time Sync> to sync the time.
The time sync can also be updated periodically. Select <Automatically Time
Sync>, and the time will be automatically synced once an hour.
20
www.greenwichmeantime.com
129.6.15.28
or refer to the following
129.6.15.29
132.163.4.103
131.107.1.10
208.184.49.9
64.236.96.53
132.163.4.101
128.138.140.44
69.25.96.13
64.125.78.85
68.216.79.113
Advertisement
Table of Contents
