Network Setup - Okina Professional H.264 Setup Manual

To Define Recording Settings:
•
Select <Record Setup> from the OSD main menu.
•
Select <ezRecord> as Preset Configuration option, and select wanted number of recording
day in ezRecord Setup; other setting will be automatic arranged by the unit.
•
Consider your own needs and select a Preset Configuration setting from <Best Quality>,
<Standard>, and <Extended Record>. Detailed information refers to Professional H.264 DVR
User's Manual, Preset Record Configuration.
•
Adjust the Recording schedule, Pre-alarm, Circular and Audio parameters.
•
When the settings are completed, press ENTER to confirm and save the settings; or ESC to
abort.
To Select Viewing Mode:
•
Press MODE button repeatedly to select the wanted display mode. The available viewing
modes are full-screen, 2×2, 3×3, and 4×4 split-window.

Network Setup

Using LAN / Cable Modem:
Configure the LAN setup when you plan to use a LAN, WAN, or Internet connection without a dialup
modem. It requires an Ethernet connection to a network. The default ID of your Professional H.264
DVR must be changed to avoid network conflicts.
•
From OSD main menu, select <System Setup>
item to <LAN> or <PPPoE> according to your network application, and enter <LAN Setup>.
•
For DHCP user, set the DHCP to <ON>. The IP address, Netmask, Gateway and DNS settings
are retrieved from network servers. DHCP is dynamic that the settings change from time to time.
•
For Non-DHCP user, set the DHCP to <OFF>. You must enter an IP address, Netmask,
Gateway and DNS settings. Please obtain the information from your network service provider.
•
To change the IP address, Netmask, Gateway and DNS value, press UP/DOWN keys to move
the cursor to the item. Use LEFT/RIGHT keys to access each section of the value and press
ENTER, then change the value using UP/DOWN keys.
•
PPPoE users must set the <PPPoE Account>, <PPPoE Password> and <PPPoE Max Idle>
as well.
•
When the settings are complete, press ENTER to confirm and save the settings; or ESC to
abort.
Connecting Remote PC with the DVR via Modem:
DVR Configuration>>
•
Connect a USB modem to the USB socket and connect a working phone line to the modem.
•
From OSD main menu, select <System Setup>
<Dial-in Setup> to set up the Dial-In settings, including Dial-in Account, Password, Server and
Client IP, etc.
<Network Setup>, set the <LAN Select>
<Network Setup> <Modem Setup>
5