Live Configuration - Okina TVI-04 User Manual

3.1.2 Time & date
Step1: enter into system configurationbasic configurationtime & date; refer to Fig 3-4:
Step2: set the date format, time format, time zone in this interface; click off "sync time with NTP server" to refresh NTP server date; user
also can adjust system date manually
Step3: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button to exit current interface.
3.1.3 DST
Step1: enter into system configurationbasic configurationDST; refer to Fig. 3-5:
Step2: in this interface, enable daylight saving time, time offset, mode, start & end month/week/date, etc.
Step3: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button
to exit current interface.

3.2 Live configuration

Live configuration includes four submenus: live, main monitor and mask.
3.2.1 Live
In this interface, user can setup camera name.
Step1: enter into system configurationlive configurationlive; refer to Fig 3-6:
Fig. 3-4 basic configuration-time & date
Fig. 3-5 basic configuration-DST
Fig. 3-6 live configurationlive
15
TVD-04 / TVD-08 / TVD-16 / TVD-16-1U User's Manual