Okina TVI-04 User Manual page 30

② Authority:
a) Admin: Admin have full control of DVR. DVR could have only one admin account.
b) Advance: Besides "firmware upgrade", "reset factory default", "shut down" and "change other
user's password", advance account could control DVR like an admin account.
c) Normal: Normal account can only do "live view", "playback", "search", "backup", "log off", "view
DVR information", and "change his own password".
3.8 P.T.Z configuration
P.T.Z configuration includes two submenus: serial port and advance
① Serial port
Step1: enter into system configurationP.T.Z configurationserial port; refer to Fig 3-32:
Step2: tick off Enable, setup the value of address, baud rate and protocol according to the settings of the
speed dome.
Step3: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step4: click "default" button to resort default setting; click "apply" button to save the setting; click "exit"
button to exit current interface.
Definitions and descriptions of network stream:
Parameter
Address
Baud rate
Protocol
③
Advance
Step1: enter into system configuration P.T.Z configurationadvance; refer to Fig 3-33:
Fig 3-32 P.T.Z configuration-serial port
The address of the PTZ device
Baud rate of the PTZ device. Range form: 110、300、600、
1200、 2400、 4800、 9600、 19200、 34800、 57600、 115200、
230400、460800、921600.
Communication protocol of the PTZ device. Range from:
NULL、PELCOP、PELCOD 、LILIN、MINKING、NEON、
STAR、VIDO、DSCP、VISCA、SAMSUNG、RM110、HY
Fig 3-33 P.T.Z configuration-advance
30
TVD-04 / TVD-08 / TVD-16 / TVD-16-1U User's Manual
Meaning