Controls And Functions - WAGNER FLEXiO 990 Owner's Manual

Turbine
power
cord
2-Stage trigger
Spray Process
With this spray system, the fluid pump delivers
material through the paint hose to the spray nozzle.
At the spray nozzle, the material is atomized (sprayed)
by the air provided by the turbine.
For a more detailed outline of the sprayer controls,
refer to pages 8-9.
English
4

Controls and Functions

Filter housing (both sides)
X-Boost™ turbine
X-Boost™ power dial
Material flow control
Paint hose
Fluid Pump:
The fluid pump delivers
material from the material
container to the spray
nozzle via the spray hose.
X-Boost Turbine:
The X-Boost Turbine
supplies the air that
forces the material out of
the spray nozzle. When
plugged in, power to the
turbine is provided by
pulling the trigger.
Suction tube
Suction tube
holder / paint can
attachment bracket
ON / OFF switch
Belt clip attachment
Spray nozzle
Adjustment ring
Spray width
lever
Fluid pump
© Wagner Spray Tech - All Rights Reserved
ON/OFF Switch:
The ON/OFF switch on the
fluid pump turns power to
the system on and off.