Controls And Functions - WAGNER FLEXIO 5000 Owner's Manual

CONTROLS AND FUNCTIONS

THANK YOU FOR YOUR PURCHASE!
Thank you for purchasing the Wagner FLEXiO sprayer with best-in-class features that are designed for spraying residential paint,
indoors or out. Only the FLEXiO sprayers have the power of the X-Boost® turbine and versatility of the iSpray nozzle that will help
you finish projects fast and professionally. They are easy to use right out of the box and with low overspray and less clogging you
will enjoy the flexibility to tackle all the painting projects on your list. We appreciate your feedback, so please visit our website and
write a review on the FLEXiO handheld sprayer so we can continue to learn and improve our products.
Just click on www.wagnerflexio.com
X-Boost Power Dial
Spray width
lever
Air cap
iSpray® Nozzle
(for large projects)
X-Boost Power Box
Handle
Spray gun
holder
4
Handle / air hose assembly
Handle
ON/OFF switch
(both sides)
Material flow control
Trigger
Material container
(1300 ml)
Detail Finish Nozzle
(for small projects)
ON/OFF switch
Air hose port
-
+
EN
iSPRAY NOZZLE
Designed to provide a roller-
like finish on broad indoor
and outdoor surfaces. Sprays
un-thinned materials including
un-thinned latex.
DETAIL FINISH NOZZLE
Ideal for detail projects and
finer finishes. It is designed for
spraying thinner materials, such
as oil based stains and paints.
The Detail Finish nozzle leaves a
smoother finish.
TURBINE ON/OFF SWITCH
The turbine ON/OFF switch turns
the system's main power ON (I)
and OFF (0).
The turbine will not turn ON with
this switch. The handle switch
must be turned ON (I) to activate
turbine.
HANDLE ON/OFF SWITCH
The handle ON/OFF switch will
ready the nozzle for spraying.
ON = (I) OFF = (0)
X-BOOST™ POWER DIAL
The X-Boost power dial adjusts
the level of air power produced
by the turbine.
TRIGGER
Pulling the trigger will deliver
spray material from the
material container to the nozzle
assembly, where it is sprayed.