External Cable To Host Adapter - LSI LSIU40HVD User Manual

2.2.3.2 Making External SCSI Bus Connections
2-14
This section provides step-by-step instructions about making external
SCSI bus connections:
Step 1. To connect external SCSI devices to the LSIU40HVD, plug the
68-pin VHDCI connector on one end of a shielded external high
density cable (see
J3 or J6 (see
This connector is now bracketed to the back panel of your
computer. Figure 2.9
Figure 2.9

External Cable to Host Adapter

Installing the LSIU40HVD
Figure 2.3) into the host adapter connector
Figure 2.1).
shows how this connection is made.