Change Status On Next Boot Menu; Boot Order Menu - LSI LSIU40HVD User Manual

3.2.1.2 Adapter Boot Order
Figure 3.2

Change Status on Next Boot Menu

Main Menu
Change Status on Next Boot:
Port
Num
LSI53C875 FC00
LSI53C875 F800
LSI53C895 F801
To change an adapter's status, select it and press Enter. Press the
Escape (Esc) key to exit from this menu.
The adapter boot order allows the user to set the order in which host
adapters will boot when you have more than one LSI Logic host adapter
in your system. When this option is selected, the Boot Order menu
appears.
Figure 3.3 is an example of the Boot Order Menu.
Figure 3.3

Boot Order Menu

Main Menu
BootSeq Bus
0 LSI53C875 00
2 LSI53C895 00
To change an adapter's boot order, select it and press Enter. You are
then prompted to enter the new boot sequence number. To remove an
adapter's boot order, press Enter again rather than entering a new
sequence number. While the maximum capacity is 32 adapters, only four
adapters can be assigned a boot order starting with boot sequence
number zero (0). If an invalid number is entered, an error message
appears. When the adapters are ordered as desired, press the Escape
(Esc) key to exit from this menu.
Starting the SCSI BIOS Configuration Utility
Irq----------Status-----------NVRAM
Level Current
9 On
9 On
9 On
DevFunc BootSeq
A0 1
90
Next-Boot Found
On Yes
Off Yes
Off Yes
Bus DevFunc
LSI53C875 00 98
3-5