Phonebook Page Definitions - Grandstream Networks GXP1610 Administration Manual

Connection Request
Port
CPE SSL Certificate
CPE SSL Private Key
Maintenance -> Security
Configuration via Keypad
Menu
Enable STAR key
Keypad locking
Password to lock/unlock
SIP TLS Certificate
SIP TLS Private Key
SIP TLS Private Key
Password
Web Access Mode
Disable SSH
Web/Keypad/Restrict
mode Lockout Duration

PHONEBOOK PAGE DEFINITIONS

Phonebook -> Contacts
Add Contact
Phonebook -> Group Management
Add Group
Phonebook -> Phonebook Management
Enable Phonebook XML
Download
Phonebook XML Server
Path
Phonebook Download
Interval
Firmware Version 1.0.0.35
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
The port for the ACS to connect to the phone.
The Cert File for the phone to connect to the ACS via SSL.
The Cert Key for the phone to connect to the ACS via SSL.
Configures the access control for the users to configure from keypad Menu.
There are three different options:
 Unrestricted. All the options can be accessed in keypad Menu.
 Basi c settings only. The CONFIG option will not be available in LCD
Menu.
 Constraint Mode. CONFIG, FACTORY FUNCTIONS and NE TWORK
options will not be available in LCD menu.
If set to "Yes", the keypad can be locked by pressing and holding the STA R *
key for about 4 seconds. A lock icon will show indicating the keypad is locked.
The default setting is "Yes".
Note:
When the k eypad is locked, users would need press and hold the S TAR * key
for about 4 seconds and then ent er the password to unlock it. If the Star Key
Lock is enabled without specifying password, user c an press and hold the
STAR * key for 4 seconds and press OK to unlock the phone.
Configures the password to lock/unlock the keypad. The password field allows
number with up to 32 characters.
SSL Certificate used for SIP TLS Transport.
SSL Private key used for SIP TLS Transport.
SSL Private key password used for SIP TLS Transport.
Sets the protocol for web interface as HTTP or HTTPS. Default setting is
HTTP.
Disable SSH access. SSH is enabled by default.
Specifies the time in minutes that the web or LCD login interface will be
locked out to user after five login failures. This logout time is used for web
login, S TAR keypad unlock and LCD restrict mode admin login. Range is 0-60
minutes.
Specify Contact's First Name, Last Name, Phone Number, Accounts and
Groups to add one new contact in phonebook.
Adds new groups. User can also edit and delete existing groups on this page.
Configures to enable phonebook XML download. Users could select
HTTP/HTTPS/ TFTP to download the phonebook file. The default setting is
"Disabled".
Configures the server pat h to download the phonebook XML. This field could
be IP address or URL, with up to 256 characters.
Configures the phonebook download interval (in minutes). If it's set to 0, the
automatic download will be disabled. The default value is 0. The valid range is
GXP1610/GXP1620/GXP1625
Administration Guide
Page 34 of 45