Firmware Version 1.0.0.35 - Grandstream Networks GXP1610 Administration Manual

Allow DHCP Option 120
to override SIP Server
3CX Auto Provision
Automatic Upgrade
Hour of the Day (0-23)
Day of the Week (0-6)
Disable SIP NOTIFY
Authentication
Authenticate Conf File
Download Device
Configuration
Maintenance -> Syslog
Syslog Server
Syslog Level
Send SIP Log
Auto Recover From
Abnormal
Maintenance -> Language
Display Language
Language File Postfix
Maintenance -> TR-069
ACS URL
TR-069 Username
TR-069 Password
Periodic Inform Enable
Periodic Inform Interval
Connection Request
Username
Connection Request
Password

Firmware Version 1.0.0.35

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
option 43 vendor specific option to do this. DHCP option 43 approach has
priorities.
Enables DHCP Option 120 from local server to override the S IP Server on the
phone. The default setting is "No".
Phone will multicast SUBSCRIBE for provision if this feature is enabled.
Enables automatic upgrade and provisioning. The default setting is "No".
Defines the hour of the day to check the HTTP/TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Defines the day of the week to check HTTP/ TFTP server for firmware
upgrades or configuration files changes. The default value is 1.
Device will not challenge NOTIFY with 401 when set to Yes.
Authenticates configuration file before acceptance. The default setting is "No".
User can press the "Download" button to export the devic e's configuration file.
The configuration file is named as "config.txt".
The URL or IP address of the syslog server for the phone to send syslog to.
Selects the level of logging for syslog. The default setting is "None". There are
4 levels: DEBUG, INFO, WARNING and ERROR.
Syslog messages are sent based on the following events:
 product model/version on boot up (INFO level);
 NAT related info (INFO level);
 sent or received SIP message (DEBUG level);
 SIP message summary (INFO level);
 inbound and outbound calls (INFO level);
 registration status change (INFO level);
 negotiated codec (INFO level);
 Ethernet link up (INFO level);
 SLIC chip exception (WARNING and ERROR levels);
 memory exception (ERROR level).
Configures whether the SIP log will be included in the syslog messages or
not. The default setting is "No".
Configures whether aut o recover or not when the phone is running abnormal.
The default setting is "Yes".
Selects display language on the phone.
Specifies the language file postfix for downloaded language.
URL for TR-069 Auto Configuration Servers (ACS).
ACS username for TR-069.
ACS password for TR-069.
Enables periodic inform. If set to "Yes", device will send inform packets to the
ACS. The default setting is "No".
Sets up the periodic inform interval to send the inform packets to the ACS.
The user name for the ACS to connect to the phone.
The password for the ACS to connect to the phone.
GXP1610/GXP1620/GXP1625
Administration Guide
Page 33 of 45