Device Tests - Lexmark C91x Service Manual

Device tests

Quick Disk Test
The Quick Disk Test performs a non-destructive read/write on one
block per track on the disk. The following message appears while the
test is running:
The Power indicator blinks while the test is in progress. If the test is
successful, the following message is displayed:
Press Go, Return, or Stop to return to the DEVICE TESTS screen.
If the test fails, then the following message is displayed:
Press Go, Return, or Stop to return to the DEVICE TESTS screen.
You cannot cancel this test.
Quick Disk Test
Testing...
Quick Disk Test
Test Passed...
Quick Disk Test
Test Failed...
5055-xxx
Diagnostic aids
3-23