Table of Contents
Advertisement
Setting Printer Alignment
1. Press Menu until the color you want to adjust displays and then
press Select.
2. Change the displayed value and press Select. You see a
message displayed that the value is Saved. If you want to skip a
selection press Select.
3. Press Menu until Alignment Test Printing is displayed and press
Select.
4. Look at the color and the value you have changed and see if
this is acceptable. If so, go to the next adjustment. If it is not
acceptable, go back to the color and adjust it again.
5. When all the values are acceptable for all colors, exit
diagnostics.
Note: If Return is pressed to exit the Alignment menu after a
margin value has been incremented or decremented, then the
default value is not changed. However, if the Alignment Test page is
requested after a margin value has been incremented or
decremented, then the default value is changed and then the
Alignment Test page is printed using the new value. The alignment
test page should be printed on letter of A4 paper only. To exit the
alignment menu, press Return.
X= sxxx* Y= sxxx*
T= sxx*
Alignment Test
Printing...
5055-xxx
Diagnostic aids
3-7
Advertisement
Table of Contents
