Table of Contents
Advertisement
Message
56 USB Port
<x> Disabled
56 Std USB
Port Disabled
58 Too Many
Bins Attached
58 Too Many
Disks Installed
58 Too Many
Flash Options
58 Too Many
Trays Attached
61 Defective
Disk
62 Disk Full
Meaning
Data has been sent to the
printer through a disabled
USB port.
Too many output bins are
installed.
Unsupported output bins are
installed.
Too many disks are installed. Turn off and unplug the
Too many flash options are
installed.
Too many trays are installed. Turn off and unplug the
The printer detects a
defective hard disk.
Insufficient memory on the
hard disk.
Action
• Press Go to clear the
message.
• Make sure the USB Buffer
menu item in the USB
Menu is set to Disabled.
Turn off and unplug the
printer. Remove or
reconfigure the output bins.
Plug the printer in and turn it
on.
printer. Remove the excess
hard disks. Plug the printer
in and turn it on.
Turn off and unplug the
printer. Remove the excess
flash options. Plug the
printer in and turn it on.
printer. Remove the excess
trays. Plug the printer in and
turn it on.
• Press Go to clear the
message and continue
printing.
• Install a different hard disk
before you perform any
operations that require
one.
• Press Go to clear the
message and continue
printing.
• Delete fonts, macros, and
other data stored on the
hard disk.
Diagnostic information
5055-xxx
2-47
Advertisement
Table of Contents
