Table of Contents
Advertisement
5055-xxx
Alternate method: Transfer belt was partially removed
Use this method when the transfer belt removal was attempted
without using the Supplies Menu to lower the belt.
1. Turn the printer off.
2. Remove the two thumbscrews on the transfer belt cover.
3. Remove the waste toner bottle.
Note: Be careful not to spill the toner.
4. Look behind the white handle (do not turn the handle) for one of
the cams that raises the belt.
A metal follower has fallen off the cam.
5. With a screwdriver, push up on the follower and gently push it
back on the transfer belt frame.
6. Seat the transfer belt back into the printer.
7. Reinstall the waste toner bottle.
8. Use the proper removal of the belt by lowering the transfer belt
in the Supplies Menu. Go to
page
4-56.
4-64
Service Manual
"Transfer belt removal" on
Advertisement
Table of Contents
