Table of Contents
Advertisement
Memory Support for the X10DRL-i Serverboard
The X10DRL-i serverboard supports up to 512 GB of ECC LRDIMM (Load-Reduced
DIMMs) or 256 GB of ECC RDIMM (registered DIMMs) DDR4-2133/1866/1600
memory in eight DIMM slots. Memory speed is dependent on the CPU. For the
latest memory updates, please refer to our website a at http://www.supermicro.
com/products/motherboard.
Processor & Memory Module Population Configuration
For memory to work properly, follow the tables below for memory installation.
Processors and their Corresponding Memory Modules
CPU#
CPU 1
P1-DIMMA1
CPU 2
P2-DIMME1
Processor and Memory Module Population for Optimal Performance
Number of
CPUs+DIMMs
1 CPU &
CPU1
2 DIMMs
P1-DIMMA1/P1-DIMMB1
1 CPU &
CPU1
4 DIMMs
P1-DIMMA1/P1-DIMMB1, P1-DIMMC1/P1-DIMMD1
CPU1
1 CPU &
P1-DIMMA1/P1-DIMMB1, P1-DIMMC1/P1-DIMMD1 + Any memory pairs in P2-
5~8 DIMMs
DIMME1/P2-DIMMF1/P2-DIMMG1/P2-DIMMH1 slots
2 CPUs &
CPU1 + CPU2
4 DIMMs
P1-DIMMA1/P1-DIMMB1, P2-DIMME1/P2-DIMMF1
2 CPUs &
CPU1 + CPU2
6 DIMMs
P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1
CPU1 + CPU2
2 CPUs &
P1-DIMMA1/P1-DIMMB1/P1-DIMMC1/P1-DIMMD1, P2-DIMME1/P2-DIMMF1/P2-
8 DIMMs
DIMMG1/P2-DIMMH1
Populating RDIMM ECC Memory Modules
Corresponding DIMM Modules
P1-DIMMB1
P2-DIMMF1
CPU and Memory Population Configuration Table
(For memory to work properly, please follow the instructions below.)
5-9
Chapter 5: Advanced Serverboard Setup
P1-DIMMC1
P1-DIMMD1
P2-DIMMG1
P2-DIMMH1
Advertisement
Table of Contents
