Battery Installation & Replacement - iNFinuvo Hovo 510 User Manual

Battery Replacement & Install
1. Remove 2 screws to open battery compartment door. (See Fig. 1)
2. Connect battery plug to the connector on main unit. (See Fig. 2)
3. Make sure battery polarity is correct to avoid potential damage to the machine.
4. Leave the cleaner in charging status to keep the battery at best performance while not in use.
5. Only use original battery from manufacturer when you replace the battery.
Take the battery out if you do not use the cleaner for a long time.
1.
2. Turn off Power before removing battery from the machine.
Don't put the battery at hot environment (over 45C/113F) or in the water.
3.
4. Don't apply large external force to battery or drop it from high place.
Battery must be recycled. Do not disposal of it in household trash or in fire. Otherwise,
5.
it might explode under high heat.
In case of battery leakage, don't let the liquid exposed to skin or clothes. Immediately
6.
wipe it with dry clothesand send damaged battery to recycling station.
Do not use battery from any other suppliers when you replace the battery.
7.
8. To extend battery life, make sure to charge battery manually for 12 hours when you use the
cleaner for the first time, or remove battery for storage when you will not use cleaner for a
long time. Otherwise, the performance of cleaner will be affected and running time will be
much shorter than the normal working time. It normally take a few charging / discharging
cycles for the battery to reach peak performance.
Fig.1
Fig.2