Front Wheel; Trouble Shooting - iNFinuvo Hovo 510 User Manual

Cleaning of Main Brush and Floor Brush:
1. To keep your cleaner always working at peak performance,
regularly clear hairs and debris around the brushes & wheels.
Clean the dust around the air intake. Rotate the brush
slowly and cut any tangled hair and twisted thread, etc
with scissors or pull them out.
2. Carefully clean the main brush and floor brush.
Cleaning of Front Wheel:
You can clean the front wheel with a clean brush. (see figure below)
Error code and common solutions:
When cleaner has an error, press SET button twice on the remote control to display the error code.
Press POWER button on remote control to clear error code display.
Error Code
E001
E002
E003
E004
E005
If the problem still exists, please contact the technical support center and warranty
provider for further assistance (www.hovobots.com). This cleaner needs to be serviced by
professional staffs.
Do not try to disassemble it by yourself.
Failure Cause
Ground detection sensors
Middle brush
Power off
Left & right wheel
Dustin poor contact
How to solve
Clean the sensors at the front bottom of the cleaner
Clean the rubbish such as hair, thread wrapped on
the brush
Use the adaptor to charge the cleaner. Use it again
after it is fully charged.
Check the left wheel & right wheel. Clean them if
necessary
Check the dustbin and re-install the dustbin after
cleaning