Filter - iNFinuvo Hovo 510 User Manual

Filter Replacement & Cleaning:
A. Press the two side clips over the dust bin to open the fencing plate. If the rubber part
attached to fencing plate is worn out, you need to take it out and replace it.
(See Fig. 1)
B. Press the button on dust bin, the fan assembly will automatically pop up
(see Fig. 2);
Tip: Do NOT let water get into the fan assembly when you clean it.
C. Pop up the blower motor (optional), remove the filter, and clean the dust bin. (see Fig. 3)
Fig.1
D. Clean the filter by hair dryer with cold wind or using brush cleaner. (see Fig 4 and
Fig 5)
Fig. 4
E. Re-install the filter.
Fig. 1
Fig.2
Take out
Fig. 5