Page 2
1.6 Warranty 3.1 Battery installation Use the original battery. 5V USB cable and AC charger should be plugged to wall outlet for vacuum battery charging. DO 3.2 Install and remove side brushes NOT use the computer USB port to charge the vacuum battery. 4.
Register your product now to activate your warranty vacuum when you throw the product away. Get technical support Visit www.infinuvo.com if you need Request warranty service (only valid if you buy products from authorized a battery replacement or email support@metapo.com...
Top view Front bumper Dust bin USB charging port USB cable Bottom view Side brush (L) Side brush (R) cable Battery compartment Note: Battery is pre-installed in the robot.
a. Side brush installation b. Side brush removal 3.1 Battery Installation Note: a. Unscrew battery compartment cover Side brush is removable. Hold 2 bristles of side brush and pull it out gently. b. Connector wires (red, white and black) should match battery wires colors. Connect battery with black color connector which only allow wires insertion correctly and make sure connector is locked 4.
Page 6
4.1.2. Product running mode a. Auto mode Robot won't stop cleaning until the Blue indicator stays on battery runs out. It will move around walls, barriers and stairs automatically. Low clearance dark area mode Once low clearance dark area is detected, the robot will clean it for 5 minutes with high cleaning efficiency.
dust bin dust bin dust bin Note: Note: Dust bin can be cleaned with water. dust bin dust bin 5.1 Daily Storage If you plan on not using your vacuum for a while, make sure the battery is fully charged and remove it from the vacuum and store it in a cool and dry environment.
Page 8
Check the indicator status listed on page 10 Note: Please contact support@metapo.com if problem does not resolve. dust bin 35ML Input current Note: Infinuvo reserves the right to make any technical or design changes to the product as a result of continuous product improvement.