Part 2: Safety Requirements; Symbols Found On The Product; Regulatory Compliance; North America - Thinklogical SDIXtreme 3G Product Manual

Part 2: Safety Requirements

Symbols found on the product

Markings and labels on the product follow industry-standard conventions. Regulatory markings
found on the products comply with requirements.

Regulatory Compliance

®
Thinklogical products are designed and made in the U.S.A. Products have been tested by a
nationally recognized testing laboratory and found to be compliant with the following standards
(both domestic USA and many international locations).

North America

These products comply with the following standards:
Safety
ANSI/UL60950-1: 1
CAN/CSA C22.2 No. 60950-1-03
LASER Safety
CDRH 21CFR 1040.10
Class 1 LASER Product
Electromagnetic Interference
FCC CFR47, Part 15, Class A
Industry Canada ICES-003 Issue 2, Revision 1
Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference, in
which case the user may be required to take adequate measures.
Revision E
st
Edition (2003)
13
July 2012