Hisun HS500ATV-2 Maintenance Manual page 91

M10locknuts(4pcs)to ensure a torque of 40～45Nm.
Caution:A:These components should be greased with butter
before assembly.
B:The surface of components can not be cracked.
Check whether these components are greased with butter and then
tighten the up-and-down rocker arm assembly and L/R fore
dampers and ther components.Fix the L/R tension rods into hole
by way of the trough of
pcs),and make these tension rods bisection on feet.
open-groove nut with cotter pin(4
91