Hisun HS500ATV-2 Maintenance Manual page 65

1.Check the Brake Fluid Box for crack, leakage and other
potential defects.
2.Check Fastening Bolts of all Fuel Pipes for possible
looseness or damage.
3.Check all Fuel Pipes for deterioration, distortion, crack, wear and
other hidden defects.
4.Check the Brake Plate Clip for distortion, crack, rust and stuck.
5.Inspect the Brake Shoe for wear condition. Brake shoe
must be replaced when worn out. (Figure 4-2-8)
6、 Inspect the Brake Shoe for maximum wear, distortion
and crack, in which case it must be replaced.
Maximum wear of Rear Disk Brake Plate is less than
Figure 4-2-8
1) Brake Shoe
1.5mm
65