Hisun HS500ATV-2 Maintenance Manual page 51

4.Remove the cotter pin,
open-groove nut and
cushion at the bottom
of the Steering Vertical Column. (Figure 4-1-4)
1）.cotter pin 3.2×32
2）.cushionф14×ф32×4
3）.Hexagon open-groove nut M14
5、Remove the supporting
brackets of the steering
vertical column
(Figure 4-1-5)
1)Supporting stent
2)Inner and outer supporting
Bracket
3)safety cushion
6.Remove outer ball pin
components on tension
rod form turning joint
(Figure 4-1-6)
Figure 4-1-3)
Figure 4-1-4
Figure 4-1-5
51