Hisun HS500ATV-2 Maintenance Manual page 53

Torque: 32-36N.m
1)Steering drop arm assembly
2)Hexagon open-groove nutM10
3)cotter pin 3.2*32
4)Tension rod
2.Check whether the inner and outter ball pin of the tension
rod is loosen or got stuck. (Figure 4-1-8)
In occasion of above defects, further inspection of the
exact causation must be carried out and replace with new
ball pin components.
Caution: Continuous use of defective ball pin
3.check whether the tension rod is bended, cracked or
rusted. In occasion of above problems, please have the
tension rod replaced.
Caution: tension rod should not be repaired by
4. Check whether the hexagon open-groove nut and cottor pin
are intact. (No crack or flaw is allowed)(Figure 4-1-8).
Those two components are crucial and should be replaced
whenever there is a potential problem.
5.Check whether the supporing bracket is firmly fixed to
might cause severe injury or death.
welding .
53