Sony PMW-EX1R Operating Instructions Manual page 162

Warning indication
on LCD/EVF
Backup Battery End
Please Change.
Unknown Media(A)
Please Change.
Media Error
1)
Media(A) Needs to be
Restored
Reached Clip Number
Limit
Cannot Record on
1)
Media(A)
Media Error
Cannot Record to
1)
Media(A)
Media Error
Cannot Use Media(A)
Cannot Use Media(A)
Unsupported File System
Video Format Mismatch
Copy Protected Input
Cannot Record
DVCAM Input Signal!
Cannot Record
Media Error
Playback Halted
1)
Media(A) Error
2)
HDD A Battery Near
End
2)
HDD A Battery End
Not Enough Capacity
1)
Change Media (A)
Reached Duplication
Limit
1)
Change Media (A)
162 Error/Warning Indications
Buzzer Tally
lamps
1)
1)
1)
Intermittent Flashing
Continuous Rapidly
flashing
Cause and measures
The remaining power of the backup battery is insufficient.
Replace the battery with a new one.
A partitioned memory card or one that contains recorded clips
exceeding the number permitted with this camcorder is loaded.
This card cannot be used with this camcorder. Remove it and
load a compatible card.
An error occurred with the memory card. The card requires
restoration.
Remove the card, load it again, and restore it.
The maximum number of clips for a single memory card is
reached. No more clip can be recorded on the card.
Replace it with another card.
Recording cannot be done, as the memory card is defective.
As playback may be possible, it is recommended to replace it
with another card after copying the clips, as required.
Neither recording nor playback can be done, as the memory
card is defective.
It cannot be operated with this camcorder. Replace it with
another card.
A card of a different file system or an unformatted card was
inserted. It cannot be used with this camcorder.
Replace it with another card or format it with this camcorder.
The external signal input via the i.LINK connection cannot be
recorded, as the Video Format setting is different from the
signal format of the external input signal.
Change "Video Format" of the OTHERS menu to match it to
that of the external signal.
The external signal input via the i.LINK connection cannot be
recorded, as the stream is copy-protected.
Check the input signal.
The external signal input via the i.LINK connection cannot be
recorded, as it is a DVCAM stream.
An error occurred in reading data from the memory card, and
playback cannot be continued.
If this frequently occurs, change the memory card after
copying the clips, as required.
Recording cannot be done, as an error occurred with the
memory card.
If this frequently occurs, change the memory card.
The battery power of the connected HDD will be exhausted
soon.
Change the battery at the earliest opportunity.
The battery of the connected HDD is exhausted. Recording
cannot be performed.
Stop operation to change the battery.
There is not enough capacity for copying.
Replace the card with another one.
The card have already ten clips having the same name as that
you tried to duplicate.
Replace the card with another one.