Adding The Ok Mark - Sony PMW-EX1R Operating Instructions Manual

Adding the OK Mark

By adding the OK mark to a clip recorded in HD
Mode, you can prevent the clip from being
deleted or divided inadvertently.
The OK mark is also used to obtain a thumbnail
screen of only the marked clips (OK-Clip
thumbnail screen) when you press the
THUMBNAIL button.
For the OK-Clip thumbnail screen, see "Displaying
the OK-Clip thumbnail screen (HD Mode)" on page
100.
Note
The OK mark cannot be added to clips recorded
in SD Mode.
To add the OK mark in Camera mode, assign the
OK Mark function to an assignable button.
For function assignment, see "Changing Functions
of the Assignable Buttons" on page 69.
Adding the OK mark
In Camera mode, you can add the OK mark to the
last clip recorded on the SxS memory card
currently selected.
When recording of a clip ends, press the
assignable button to which you assigned the
OK Mark function.
The message "OK Mark" is displayed on the
screen for three seconds.
Deleting the OK mark
In Camera mode, you can delete the OK mark
added to the last clip on the SxS memory card
currently selected.
1
Press the assignable button to which
you assigned the OK Mark function.
The confirmation message "Execute/Cancel"
is displayed.
2
Select "Execute."
The OK mark of the last clip is deleted.
To add or delete the OK mark to or from clips
before the last one
Operate in Media mode
See "Adding/Deleting the OK Mark to/from a Clip
(HD Mode Only)" on page 107.
Adding the OK Mark 67