3
Select the picture profile name for
which the picture profile is to be loaded
from the memory card.
The selected picture profile number is
displayed at the bottom of the screen.
See "Selecting a Picture Profile using the
PICTURE PROFILE menu" on page 84.
4
Select "SET" of the PICTURE
PROFILE menu.
5
Select "Recall" of "PP Data."
The message "PP Data Recall Execute/
Cancel" is displayed at the bottom of the
screen.
6
Select "Execute."
Loading of the picture profile from the
memory card begins.
When overwriting to the picture profile you
specified in step 3 ends, the completion message
is displayed for three seconds, and the loaded
settings are immediately reflected.
Note
After you start loading, do not remove the SxS
memory card until the completion message is
displayed.
86
Picture Profiles