Deleting Clips - Sony PMW-EX1R Operating Instructions Manual

3
To copy, select "Execute" then press the
jog dial or the joystick.
Copying begins.
An execution message and an in-progress bar are
displayed during copying.
When copying ends, the thumbnail screen is
restored.
To cancel copying on the way
Press the CANCEL button.
Copying is canceled and the thumbnail screen is
restored.
Copying clips collectively
By using the Setup menu, you can copy clips on
an SxS memory card collectively to another SxS
memory card.
If the memory card contains clips of both HD and
SD Mode, only the clips of the currently selected
mode are copied. This may be convenient when
you wish to extract clips of the same mode only.
1
Press the MENU button when the
normal thumbnail screen is displayed
or in the Stop status.
2
Select "Clips" from "Copy All" of the
OTHERS menu.
OTHERS
Tr i gger Mode : Both
Count r y : NTSC Area
HD/SD Mode : HD
Video Format : HQ 1080 / 60i
C l i p :
00:00
Copy All B
Format Media B
3
Specify the direction of copying.
AkB: To copy from the card in slot A to
that in slot B
BkA: To copy from the card in slot B to
that in slot A
A confirmation message is displayed.
Copy All Clips?
4
Select "Execute."
Copying begins.
108 Clip Operations
B
C l i p s
A
G e n e r a l F i l e s B
B
Clips&General B
>
A = B
Execute
Cancel
The status of progress is displayed during
copying.
In HD Mode, only the clips of HD Mode are
copied.
In SD Mode, only the clips of SD Mode are
copied.
To cancel copying in progress
Press the CANCEL button.
Copying is canceled, and the OTHERS menu
screen is restored.
When copying is completed
The completion message displayed. When the
OTHERS menu screen is restored, press the
MENU button to exit Menu mode.
To copy the clips and planning metadata files
simultaneously
Select "Clips&General" for "Copy All" in step 2
above.
All files in the General folder that contain
planning metadata on the SxS memory card are
copied simultaneously with the clips.

Deleting Clips

You can delete clips from the SxS memory card.
Note
An HD-mode clip marked OK cannot be deleted.
To delete the clip, first remove the OK mark (see
page 107).
Deleting a specified clip
B
A You can delete a clip selected on the thumbnail
screen.
1
Select the clip you wish to delete on the
thumbnail screen then press the
joystick or the jog dial.
The Clip Operation menu of the thumbnail
screen pops up.
2
Select "DELETE CLIP" from the Clip
Operation menu.
The information screen for the selected clip
appears, and a confirmation message is
displayed below the index frame image.
3
To delete, select "Execute" then press
the jog dial or the joystick.
The clip is deleted.