Advertisement
R
CAUTION
The appliance must be in complete shutdown, completely
cool and the exhaust blower off before performing any
cleaning or maintenance. There is a risk of shock if
the appliance is not unplugged before servicing the
appliance.
NOTE: Performing this routine service will require approximately 20
minutes a month depending on type and quality of fuel you burn.
CLEANING OR
INSPECTION
FIREPOT
Softwood Pellets
FIREPOT
Hardwood Pellets
FIREPOT
Corn, Wheat, or Sun-
flower Seeds
ASHPAN
Wood Pellets
ASHPAN
Alternate Fuel
HEAT EXCHANGER
EXHAUST BLOWER
Heat Exchanger
Baffle
Latches
Insert flat head screwdriver into "V"
section and push down and the
bottom of the latch will fall forward
off of post
Page 2
FREQUENCY
Every 5 bags
-OR-
Every 3 bags
-OR-
Every 1 bag
-OR-
Every 5 bags
-OR-
Daily
-OR-
Every 1 ton of
-OR-
fuel
Every 3 tons of
-OR-
fuel
Ashpan
Locating ears - 1 on
each side. Fit behind
bottom edge
7014-139F
PROPER SHUTDOWN PROCEDURE
1. Set the wall control thermostat to "OFF" on AUTOMATIC/
MANUAL SETTING screen and let the appliance com-
pletely cool. The exhaust blower must be off before you
can unplug the appliance before servicing.
2. Smoke spillage into the room can occur if the appliance
is not cool before unplugging.
DAILY
WEEKLY
X
X
X
X
X
FIREPOT MAINTENANCE
Firepot Air
Holes
Firepot Exploded View
The firepot floor and firepot air holes will need to be
scraped occasionally depending on the quality of fuel
being used. Use a putty knife, a flat head screwdriver
or the firepot clean-out tool provided to remove excess
carbon from the firepot.
EVERY 2
YEARLY
WEEKS
X
X
Firepot
Floor
June 27, 2008
Advertisement
