Sony SRW-5100 Operation Manual page 70

Returning to the original settings
Press the [F9] (CANCEL) button, then carry out entry.
To change a character during the operation
Press the cursor R button, then move the cursor to the
ID or ADMIN frame. With the cursor T or t button,
change the character insertion position.
When not all characters can be shown within the ID
or ADMIN frame
On the left or right of the comment frame, t or T
appears.
6
Press the [F10] (SAVE/EXIT) button.
This returns to the original screen.
HDCAM format TELE FILE menu
Accessing the TELE FILE menu screen
There are two methods of accessing the TELE FILE menu
screen, as follows.
• In the CUE menu screen, press the [F4] (TELE FILE)
button.
• Set the VTR SETUP menu item 124 "Tele-File MENU
auto popup" to "on", then in the HOME, VIDEO,
AUDIO, TC, CUE, or SETUP menu screen, insert a
cassette that has an MLB-1M-100 memory label
(option) attached.
To scroll the TELE FILE menu screen horizontally
Press the cursor T or t button.
There are two ways of displaying log (IN/OUT point) data
in the TELE FILE menu screen, as follows.
• In the TELE FILE menu screen, press the [F2] (ENTRY
POINT) button, and select "IN/OUT point".
• Set the VTR SETUP menu item 126 "Tele-File ENTRY
POINT" to "IN/OUT point".
Note
While the data is being changed, if the write-protect setting
has been made for the whole TELE FILE menu, then data
changed before the setting was made is rewritten.
To exit the TELE FILE menu without overwriting
the changed point(s)
Press the EJECT button, or press the ALT/[F2] (UNDO
ALL) buttons. After a window that confirms cancellation
is displayed, hold down the SFT button, and press the [F2]
(UNDO ALL) button. The memory label contents when
the cassette was inserted are restored.
If you inadvertently press the EJECT button
without rewriting the data
Reinsert the ejected cassette within 30 seconds, and press
the [F10] (WRITE/EXIT) button. This writes the data from
immediately before ejection.
70
4-4 CUE Menu
The TELE FILE menu screen scrolls in the following four
stages. Scroll the screen with the cursor T or t button.
1
2
3
6
a REC DATE (recording data date)
Shows the last date of recording.
b TITLE
Shows the title of the cassette content.
c Time
Shows the time data of a cue point.
d Mrk (mark)
Shows an indication of a cue point attribute (OK/NG/KP/
blank).
0
9
8
4
5
7
qa