Sony SRW-5100 Operation Manual page 40

To store the current VTR menu settings
Move the cursor (B) to the [C] (CURRENT SETUP)
position.
To store all VTR memory banks
Press the [F7] (SELECT ALL) button.
Note
If there are protected items at the destination end, it is
not possible to select the [F7] (SELECT ALL) button.
5
Move the cursor (B) to the "Memory Stick" side using
the cursor T button, and use the cursor R or r button
to move the cursor to the bank number ("Memory
Stick" side) where the data is to be saved.
Destination
(flashing)
The flashing cursor bar indicates the storage
destination.
6
To change the title of the bank, press the [F6] (EDIT
TITLE) button.
For details, see "4-1-6 Adding Titles to the Data" on
page 43.
7
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
8
Press the [F9] (COPY) button while holding down the
SFT button.
Storage begins.
After the storage is complete, the title of the VTR
memory bank appears on the "Memory Stick" side.
40
4-1 Registering and Storing Menu Settings
Preventing accidental erasure after saving settings
Press ALT/[F2] (PROTECT) buttons and a symbol
will appear to the right of the memory card bank
number.
9
Press the [F10] (EXIT) button.
The SET UP menu appears again.
Storing cue point lists to a "Memory Stick"
You can store up to 8 pages of cue point lists to a "Memory
Stick" along with titles.
1
Press the SET UP button.
The SET UP menu appears in the display.
2
Press the [F2] (MEMORY CARD) button.
The MEMCARD menu appears in the display.
3
Press the [F4] (SHOW CUESET) button.
The display for storing cue point lists appears.