Tc Menu - Sony SRW-5100 Operation Manual

4-3 TC Menu

The TC menu allows you to set time code-related items
through a single menu. The HOME, TC, VIDEO, AUDIO,
PF1 and PF2 menus show information that includes the
operation mode, time code of the current position, and the
time code type, etc.
VITC: Time code type (LTC/VITC)
TCR: Time data type
(CTL/TCR/UBR/DUR)
For details on operation modes, see "4-2 HOME Menu"
on page 48.
Button Indication
[F1] TIMER SEL
[F2]
TIMER RESET
[F3]
TIMER SET
[F4] TIMER HOLD
[F5] TCR SEL
[F9]
DF/NDF
[F10] TC2 SEL
ALT/[F1] TAPE TIMER
ALT/[F2] PDPSET MENU
ALT/[F3] TC CONV MENU
ALT/[F4] PDTC DISP
ALT/[F5] FC CHARA
ALT/[F6] CHARA SUPER
ALT/[F7] CHARA H-POS
ALT/[F8] CHARA V-POS
INTRP (interpolation): This appears when time code cannot
be read correctly and correction has been performed.
DF: Drop frame mode type of playback time code
(DF/NDF)
IN: Time data for an IN point
OUT: Time data for an OUT point
Function
Selects time data type.
Resets the time counter.
Sets the time data.
Holds the time counter.
Sets the time code reader.
Selects drop frame mode.
Selects the content of the second line of the time
code display.
Selects the CTL display mode.
Pulldown time code preset
Frame conversion time code preset
Pulldown time code display
Superimposition of text data on FC output
Specifies superimposition of character information to
the HD SDI output and HD-SD converter output.
Changes the superimposition position (horizontal).
Changes the superimposition position (vertical).
To activate the TC menu
Press the TC button.
To change the TC menu page
Press the ALT button.
F1: Field number (F1/F2)
Data entry window
Settings
CTL, TC, UBIT
VITC, auto, LTC
DF, NDF, auto
OFF, LTC, auto, VITC, CTL, UBR
UBV
+ –12H, 24H
on, off
on, off
on, off
0 to 15
0 to 15
53
4-3 TC Menu