Vtr Setup Menu - Sony SRW-5100 Operation Manual

When the ALT/[F10] (REMOTE 50-PIN) buttons are
set to "on"
You can operate this unit with a device connected to the
REMOTE 2 PARALLEL I/O(50P) connector.
Note
When operating this unit through an external device with
the ALT/[F9] or ALT/[F10] buttons set to "on", all of the

4-7-1 VTR SETUP Menu

All menu items required for setting up the operating
conditions are displayed in the scrollable VTR SETUP
menu.
For HOME, TC, VIDEO, AUDIO, PF1, and PF2,
including the screens displayed by pressing the ALT
button, you can register about 120 menu items.
For details on the VTR SETUP menu items, see the
Appendix "Menu List" on page 111.
For details of the PF assign menu, see "4-1-3 Registering
VTR SETUP Menu Items to Function Keys" on page 35.
Button Indication
[F1]
PREV PAGE
[F2] NEXT PAGE
[F5]
CATEGORY
[F6]
NAME
[F7] SCROLL
[F8]
CHANGE DATA
[F9] CANCEL
[F10]
SAVE/EXIT
88
4-7 SET UP Menu
Category/index window
Function
Moves to the beginning of the previous category.
Moves to the beginning of the next category.
Display by category
Display in alphabetical order
Scrolling display of all menus
Changes the setting.
Cancels the setting operation.
Sets the value and exits the VTR SETUP menu.
tape operation and editing buttons are disabled, with the
exception of the STOP and EJECT buttons. You may also
set this unit so that all buttons are enabled or disabled.
Perform this setting using the VTR SETUP menu item 008
"LOCAL FUNCTION ENABLE". You cannot, however,
disable the menu and remote operation mode selection
buttons.
Because the setup data that the SRW-5100 maintains can
also be used with the SRW-5800, the data contains menu
items that are not compatible with the SRW-5100. Such
items do not appear in the display normally.
For details on how to display and change the setting of the
items incompatible with the SRW-5100, see the Appendix
"To display the menu items incompatible with this unit
(items dedicated to the SRW-5800)" on page 90.
To activate the VTR SETUP menu
Press the SET UP button, then press the [F6] (VTR
SETUP) button.
Item window