Sony SRW-5100 Operation Manual page 42

Saved data
5
To change the title of the memory bank, press the [F6]
(EDIT TITLE) button.
The title can also be changed after the settings are
recalled.
For details, see "4-1-6 Adding Titles to the Data" on
page 43.
6
Press the cursor t button to move the cursor (B) to
the VTR memory bank side, then press the cursor R or
r button to move the cursor to the VTR memory bank
number where the recalled data are to be stored.
To change the current VTR menu settings
Move the cursor (B) to [C] (CURRENT SETUP).
To replace all VTR memory bank contents with
"Memory Stick" data
Press the [F7] (SELECT ALL) button.
Note
If there are protected items at the destination end, it is
not possible to select the [F7] (SELECT ALL) button.
7
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
8
Press the [F9] (COPY) button while holding down the
SFT button.
This unit recalls the contents of the "Memory Stick."
42
4-1 Registering and Storing Menu Settings
After the recalling process is complete, the title of the
memory bank of the "Memory Stick" appears under
the VTR memory bank indication.
9
Press the [F10] (EXIT) button.
The SET UP menu appears again.
Recalling a cue point list from a "Memory
Stick"
Recalling a cue point list from a "Memory Stick" replaces
the current cue point list with the recalled data.
1
Press the SET UP button.
Destination
(flashing)
The SET UP menu appears in the display.
2
Press the [F2] (MEMORY CARD) button.
The MEMCARD menu appears in the display.
3
Press the [F4] (SHOW CUESET) button.
The menu for storing cue point lists appears.