Sony SRW-5100 Operation Manual page 123

Item number Item
623 CHARACTER V-
POSITION
624 CHARACTER TYPE without BG
625 CHARACTER SIZE
626 DISPLAY
INFORMATION
select
627 CHAR WARNING
DISPLAY at dual
line mode
Setting Function
0 Sets the vertical position of text information superimposed
on the signal output from the MONITOR connector of SD
SDI OUTPUT, the SD OUTPUT COMPOSITE connector
[22]
and MONITOR connector of HD SDI OUTPUT. A setting of
0 displays the information at the bottom of the screen, and
23
the position moves up as the setting is increased. There are
24 possible settings, from 0 to 23.
Note
If two-line display is selected in item 626, sometimes the
second line will disappear in the middle of the screen.
Sets the style of text information such as time codes output
outlined from the MONITOR connector of SD SDI OUTPUT the SD
translucent OUTPUT COMPOSITE connector and MONITOR
[with BG]
connector of HD SDI OUTPUT.
without BG: White characters, with no background.
outlined: White characters outlined in black.
translucent: White characters on a gray screen
with BG: White characters on a black background.
Note
For the SD OUTPUT COMPOSITE (MONITOR) connector,
the "translucent" setting is automatically changed to "with
BG".
× 1
Sets the size of text information such as time codes output
from the MONITOR connector of SD SDI OUTPUT, the SD
OUTPUT COMPOSITE connector and MONITOR
connector of HD SDI OUTPUT.
× 1: Normal size.
× 2: Twice normal size.
time data & status When item 620 is set to "on", this setting specifies the
time data & UB content of text information output from the MONITOR
time data & CTL connector of SD SDI OUTPUT, the SD OUTPUT
time data & VITC COMPOSITE connector and FORMAT CONV. OUTPUT
[time data only]
(OPTION) connector.
time data & status: Timer counter display and status
time data & UB: Timer counter display and user bits.
time data & CTL: Timer counter display and CTL.
time data & VITC: Timer counter display and VITC.
time data only: Timer counter display only.
[off]
When item 626 is set to anything other than "time data
on only", this item specifies whether warning messages flash
on the second line or not.
off: Warning messages do not flash.
on: If a warning message exists, it flashes.
Notes
• Messages that have been cleared are not displayed.
• When there are multiple warning messages, each
background.
information.
For more information about clearing warning messages,
see "Clearing warning messages" on page 107.
message flashes twice before it is replaced by the next
message.
123
Menu List