Search Control Section; Shuttle Button - Sony SRW-5100 Operation Manual

EXT SD: Lights when "extern SD" is selected by the VTR
SETUP menu item 006 "EXTERNAL REFERENCE
select".
EXT HD: Lights when "extern HD" is selected by the
VTR SETUP menu item 006 "EXTERNAL
REFERENCE select".
c SERVO indicator
Lights up when the drum servo and capstan servo are
locked.
d REC INHIBIT indicator
Only when this indicator is not lit, you can record or erase
the stop code.
The status of this indicator depends on the setting of the
VTR SETUP menu item 010 "STOP CODE INHIBIT
select" and the state of the record-protect plug on the
cassette.
Setting of the VTR State of the record-
SETUP menu item protect plug on the
010 cassette
on Recording disabled
Recording allowed
off Recording disabled
Recording allowed
a) Toggling between lit/flashing settings is possible using the VTR SETUP
menu item 104 "REC INHIBIT LAMP FLASHING".

5 Search control section

1 SHUTTLE button

2 JOG button
a SHUTTLE button
Press to enter shuttle mode. In this mode, the button lights
and playback at the speed corresponding to the angle of
rotation of the search dial is possible. The playback speed
range depends on the frame frequency of the unit. In this
mode, the search dial clicks at the positions for 0 (still
REC INHIBIT
indicator
a)
Lit/flashing
Lit
a)
Lit/flashing
a)
Unlit
3 VAR button
4 Search dial
picture) and ±10 times normal playback speed (HDCAM/
Digital Betacam) or ±8 times normal playback speed
(HDCAM-SR).
Frame frequency Playback speed range (for
HDCAM-SR format)
23.98/24 Hz ±50 times normal playback speed
25 Hz ±48 times normal playback speed
29.97/30 Hz ±40 times normal playback speed
50 Hz ±24 times normal playback speed
59.94/60 Hz ±20 times normal playback speed
b JOG button
Press to select jog mode. In this mode, the button lights up
and playback is possible at –1 to +1 times normal speed, ±2
times normal speed (HDCAM/HDCAM-SR), or ±3 times
normal speed (Digital Betacam) (determined by the setting
in the VTR SETUP menu item 107 "JOG DIAL
RESPONSE"). In this mode, the search dial does not click.
c VAR (variable) button
Press to select variable speed playback mode for noiseless
playback in the range from –0.5 to +1 times normal speed
(HDCAM-SR), from –1 to +2 times normal speed
(HDCAM), or from –1 to +3 times normal speed (Digital
Betacam). Playback exceeding this speed range is not
possible. The search dial clicks at the positions for still-
picture and normal playback speed.
d Search dial
Rotate to search for edit points. Rotate the dial clockwise
for forward playback (the B indicator lights up) or
counterclockwise for reverse playback (the b indicator
lights up). The x indicator lights up while this unit is in
stop mode.
Shuttle mode: The playback speed corresponds to the
angle of rotation of the search dial. The playback
speed range depends on the frame frequency of the
unit. (See item 1 SHUTTLE button.) The dial clicks
at the positions for 0 (still picture) and ±10 times
normal playback speed (HDCAM/Digital Betacam)
or ±8 times normal playback speed (HDCAM-SR).
Jog mode: The playback speed corresponds to the
rotational speed of the dial (–1 to +1 times normal
speed, ±2 times normal speed (HDCAM/HDCAM-
SR), or ±3 times normal speed (Digital Betacam))
depending on the setting of the VTR SETUP menu
item 107 "JOG DIAL RESPONSE"). The dial does
not click.
Variable speed playback mode: Noiseless playback is
possible in the range from –0.5 to +1 times normal
speed (HDCAM-SR), from –1 to +2 times normal
speed (HDCAM), or from –1 to +3 times normal
speed (Digital Betacam). The speed settings can be
changed using the menu. The dial clicks at the
positions for still-picture and normal playback speed.
21
2-1 Control Panel