Ruckus Wireless ZoneFlex User Manual page 88

For your reference, the default wireless settings on the Access Point are listed in
Table 43.
Table 43. Default wireless settings
Setting
SSID (network name)
Encryption (security)
Default management IP address
Configure Common Wireless Settings
1 On the left menu of the Web interface, click Configuration > Wireless (Radio
2.4G or Radio 5G on dual band APs). The Configuration > Common page
appears.
NOTE For dual band APs (ZoneFlex R300, 7982, 7962, 7372, 7363 and 7055),
the two radios (2.4GHz and 5GHz) need to be configured separately on the Web
interface. To configure the common wireless settings, click Configuration > Radio
2.4G or Radio 5G. The rest of the configuration procedures are the same as for
other models.
Figure 42. The Configuration > Wireless > Common tab
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C
Step 1: Preconfigure the Access Point
Default Value
Wireless 1 to Wireless 8 (2.4 GHz Radio)
Wireless 9 to Wireless 16 (5 GHz Radio - only
available on dual radio APs)
Disabled on all WLANs
192.168.0.1
Installing the Access Point
88