Ruckus Wireless ZoneFlex User Manual page 44

Rear Panel
Figure 19 shows the rear panel of the ZoneFlex 7363. For a description of each rear
panel part, refer to
Figure 19. ZoneFlex 7363 rear panel
Table 22. ZoneFlex 7363 rear panel elements
Number Item Name
1
2
3
4
5
ZoneFlex Indoor Access Point 9.8.1 User Guide, 800-70601-001 Rev C
Table 22.
1 3
2
Description
OPT Button Not active in this model at this time.
HARD RESET Pressing, and then quickly releasing this internal button
Button reboots the AP. Pressing and holding it for six seconds
resets the AP to factory default settings.
CAUTION!
settings erases all previously configured settings.
10/100 Ports (2) Two RJ-45 ports for 10/100Mbps connections.
10/100/1000 PoE One RJ-45 port for a 10/100/1000 PoE (Power over
Port Ethernet, 802.3af) connection.
Power Connect the power adapter (12 VDC/1.25A) to this
socket. Power can also be supplied via the 10/100/
1000 PoE (802.3af) port.
Introducing the ZoneFlex Access Point
Getting to Know the Access Point Features
4
5
Resetting the AP to factory default
44