Table of Contents
Advertisement
2.1 Physical Descriptions
2.1.1 Identification of ICA-5150 physical details
Interface
Lens
Micro-SD
Factory Default Reset
Chapter 2.
Description
User could adjust the angle of the lens manually.
User can insert a micro SD card into this slot for event recording.
This button is used to restore all the factory default settings.
Sometimes restarting the device will make the system back to a
normal state. However, if the system still got problems after
restart, user can restore the factory default settings and configure
it again.
Steps:
1.Turn off the Camera first.
2. Press and hold this button continuously.
3. Power on this camera.
4. Wait until orange LED is on. Once the Camera begins to
operate again, the device has been restored to default settings.
Note: After resetting to default, please login the camera using the
default IP (http://192.168.0.20), and username (admin) and
11
Ultra-mini HD Vandal Dome IP Camera
Hardware Interface
ICA-5150
Advertisement
Table of Contents
