Applying Power - KTI Networks KGC-310 Installation Manual

Center rack mounting
The media converter can also be installed in KC-1300 center chassis. The center chassis provides the
power supply to the converter also with optional power redundancy. Up to 16 units can be installed in
one chassis. Unscrew and remove the cover of the center connector before inserting the converter into
the chassis. Refer to the operation manual of center chassis KC-1300 for more information.

2.4 Applying Power

Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used
to supply the DC power for the unit should have the AC voltage matching the commercial power voltage in
your area.
The AC Power Adapter Specifications
AC input power: AC power voltage of your area, options -
Rated AC120V/60Hz DC7.5V 1A
Rated AC230V/50Hz DC7.5V 1A
Rated AC100V/50-60Hz DC7.5V 1A
Rated AC100V/50-60Hz DC5V 1A
Rated AC240V/50Hz DC7.5V 1A
Steps to apply the power to the device are:
1. Connect power adapter DC plug to the DC input jack located on the back of the unit before
connecting to the AC outlet.
2. Connect the power adapter to the AC outlet.
3. Check Power LED indication.
Note: Before you begin the installation, check the AC voltage of your area. The AC power
adapter which is used to supply the DC power for the unit should have the AC voltage
matching the commercial power voltage in your area.
-13-