Oce TDS100 User Manual page 33

How to add or remove a trailing strip
Place the original centrally and face down on the original feed table.
1.
The Océ TDS100 moves the original to the back.
[11] Feed the original with trailing strip centrally and face down
[11] Feed the original with trailing strip centrally and face down
Use the 'Strip' key to select 'Trailing'
2.
Use the adjustment key to add or remove a trailing strip.
3.
A positive value adds a strip, a negative value removes a strip.
Press the green start button to start the copy job.
4.
Result
The Océ TDS100 adds or removes a leading or a trailing strip.
Use the Océ TDS100 33