Oce TDS100 User Manual page 30

Place the cut sheet media centrally and face up on manual feed table
2.
[9] Feed the cut sheet media centrally
[9] Feed the cut sheet media centrally
The operator panel illuminates 'Manual' and displays the length of the original.
Set up your copy job at the operator panel
3.
Use the 'Media' key to select the media type to copy on
■
Use the exposure key to correct the background of the copy.
■
(see 'Improve the copy quality of dark and light originals' on page 34).
Use the 'Strip' key and adjustment key to add or remove a leading or trailing
■
strip
(see 'Adjust leading and trailing strips' on page 31).
Use the copies key to set the number of copies
■
Press the green start button to start the copy job.
4.
1
Note:
Result
The Océ TDS100 runs the copy job with manual media feed.
30 User manual
1
.
Not available on the single copy configuration.
1