Oce TDS100 User Manual page 32

How to add or remove a leading strip
Place the original centrally and face down on the original feed table.
1.
The Océ TDS100 moves the original to the back.
[10] Feed the original with leading strip centrally and face down
[10] Feed the original with leading strip centrally and face down
Use the 'Strip' key to select 'Leading'
2.
Use the adjustment key to add or remove a leading strip
3.
A positive value adds a strip, a negative value removes a strip
Press the green start button to start the copy job.
4.
32 User manual